AMAZA LEAK SEAL
Unique Solution For Leekages & Seepages
Unique Formulation
High Sheen Finish
Eco-Friendly
9-10 Years of Life
Guard for the Concrete
Water Repellent

Product Description
Water and moisture in the basement will considerably reduce the value of a home. That’s because moisture allows mold to grow, and the musty smell is not only unpleasant but can also cause health disorders. Leaky foundation walls in commercial structures cause similar damage. In extreme cases, liquid water will actually be seeping or flowing into the building through cracks and penetrations in the concrete wall. Amaza Leak Seal is a revolutionary product specially designed to address the leakages and seepage problems in walls and surfaces of buildings. Every product is formulated using specialized chemicals and advanced technology. These waterproofing products are meant to deal with the basic problem of dampness, ugly stains, paint peeling, crack-bridging etc.

The surface to receive the AMAZA LEAK SEAL coating viz: Vertical Walls, parapet walls should be cleaned well. Any old paint or coating should be removed by wire brush and the entire surface should be wetted with water and cleaned well. Loose concrete particles should be removed. Any cracks should be repaired with repair mortar or any other suitable product before application.

PAINT APPLICATION PROCESS
First surface to receive coating should be cleaned well. Then cracks should be filled with crack fillers / cement modifier. Apply coat of Amaza Leak Seal Additive with brush and later apply Amaza Leak Seal Emulsion uniformly like paint.

Nature | Free Flowing |
---|---|
Base | Special Acrylic Emulsion |
Colour | Available in many attractive shades |
Finish | Smooth semi glossy finish |
Mode of Application | By brush, roller or spray |
Drying Time | 20-30 min for touch dry (65% relative humidity/30°C) |
Recoating Period | 4 to 6 Hours |

Handling & Storage
Keep containers airtight during handling and storage to avoid loss of material. Store Amaza Leak Seal in a cool dry place and also protect it from extreme climatic conditions during storage, in transit and at site.
PRECAUTIONS
Apply Amaza Leak Seal to level the dents and make the surface uniform. Apply one coat of Venlac Interior Primer. Use emery paper no 320 to lightly sand this surface to achieve uniform smoothness. Clean off the dust with soft and dry cloth. Then apply the diluted Nova Max Interior Emulsion Paint.

Safety Measures
Kindly refer to the MSDS for Amaza Leak Seal which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.

