VENLAC CRACK PASTE

Use Crack Filling Compound For Both Surfaces

Non–Sagging Properties

Flexible and Can Accommodate Minor Movements in Cracks

Non–Toxic and Completely Safe for the Hands

Excellent Adhesion to Common Building Substrates

Superior Mechanical Strength

Easily Applicable by Putty Knife

Product Description

Venlac Crack Paste is an acrylic polymer based white crack filler made of acrylic emulsion polymer, properly selected graded fillers, light fast pigment & additives.Venlac Crack Paste is a ready to use crack filling compound for both interior and exterior surfaces. It ensures unmatched crack bridging ability for plaster cracks of up to 5 mm.

Surface preparation is vital for effective adhesion and bonding of Venlac Crack Paste. To start with, free the surface from laitance, loose dust particles, oil, grease and other dirt. Press Venlac Crack Paste firmly into the crack with a spatula or putty knifes and level with the surface.

PAINT APPLICATION PROCESS

Care must be taken to avoid formation of cavities or bubbles during application. Allow it set for 24 hours and then apply another coat of Venlac Crack Paste. Further POP or wall putty application can be taken up once it is fully dry. For best results allow Venlac Crack Paste to cure for 7 days.

NatureLiquid
Finish Smooth Finish
Coverage 120-140 sq.ft.per litre per coat by
brush application
Drying Time20 minutes(at 30.C+/-1C & 65+/-%R.H)
Recoate Time4 Hrs Minimum
Thinner Clean Tap / Potable Water
Shades AvailableWhite
Shelf Life24 months

PRECAUTIONS

Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures

Kindly refer to the MSDS for Venlac Crack Paste which gives detailed information on safety measures while handling the paint, which is available on request.

Store the container with the lid tightly closed in an upright position, in a cool, dry place.

Keep out of reach of children and away from eatables.

May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.

Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.

Do not pour leftover paint down the drain or in water courses.

In the event of spills, contain spillage using sand or earth.

Related Products

Amaza leak seal

cement modifier

Venlux Distember

Do You Want To Spice Up Your Space?

drop us a line for amazing living spaces

×
×

Cart

× How can I help you?