VENLAC DAMP PROOF
Dampness Problems and Waterproofing Needs
Water Resistant
Highly Flexible
Crack Bridging
Washable
Strong Adhesion

Product Description
Venlac Damp Proof is a breakthrough in waterproofing solution. Its thick, elastic, super protective film coat covers cracks and blocks water. It is fast drying and provides tough durable coating to cement, concrete and tiled floors. Intended for use on interior or exterior, vertical or horizontal, concrete block and cast-in-place concrete. It can be used to stop moisture from entering or exiting a concrete surface.

Ensure that the surface to be painted is free from any damp, loose paint, dust, wax or grease and other contaminants. Remove all contaminants such as dirt, grease, oil, dust etc. with soap powder solution using a scrubbing brush.
FRESH PAINTING SURFACE (UNPAINTED):
For freshly made concrete surface, allow it to cure for at least 4 weeks before
painting.
REPAINTING SURFACE:
Check random areas for adhesion of existing paint film. If problems are observed, total removal of old paint is required. Sand smooth and glossy surfaces to improve adhesion.

PAINT APPLICATION PROCESS
Moisture content in the surface should be less than 10%. After diluting Venlac Wonder Coate Floor Coat with 30-40% water, apply a self-priming coat. Wait 6-7 hours, then add 2 coats of Venlac Wonder Coate Floor Coat after thinning with water to obtain brushable consistency. Do not allow traffic for 48 hours, until the paint becomes hard.

Nature | Liquid |
---|---|
Finish | Smooth & Matt |
Coverage | 120-140 sq.ft.per litre per coat by brush application |
Drying Time | 20 minutes(at 30.C+/-1C & 65+/-%R.H) |
Recoate Time | 4 Hrs Minimum |
Thinner | Clean Tap / Potable Water |
Shades Available | White |
Shelf Life | 24 months |

PRECAUTIONS
Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures
Kindly refer to the MSDS for Venlac Wonder Coate Floor Coate which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.

