VENLAC EXTERIOR WATER THINNABLE CEMENT PRIMER
Undercoat For Walls, Concrete, Cement Before Finish Coat
Easy to Apply
Good Coverage
90-100% by Volume
Economical
Product Description
Venlac Exterior Water Thinnable Cement Primer for Exteriors is suitable for undercoat for walls, asbestos, concrete, cement before finish coat. It gives a suitable substrate for wall finishing. It is thinned with potable water to achieve applicable consistency. It provides a few special features to substrate as easy brushing, alkali resistant, excellent covering, quick drying and better sealing power. It is used as a primer for painting of Exterior wall finishes (water base) like Exterior Acrylic Emulsions.
PLASTER
Newly plastered surface should be left to mature for minimum period of 3 months.
CLEANING
Surface should be free from all loose plaster, dirt like dust , grease etc should be removed with sand emery paper
FILLING THE CRACKS, HOLES & DENTS
Cracked or flaked paint should be removed completely before application. Cracks and damps should be filled with Venlac Wall Putty. It should be applied with anti fungal treatment.
PAINT APPLICATION PROCESS
For New Plaster : Apply a coat of Venlac Exterior Water Thinnable Cement Primer. After application of primer allow it to dry overnight before application of finished coat.
Thinning : 4 parts of paint and 3 parts of water to get satisfactory flow of applicable consistency. Keep an interval of 3-4 hours between the two coats.
| Nature | Liquid |
|---|---|
| Method of Application | Brush, Roller, Spray |
| Finish | Matt and very Smooth |
| Drying Time : [25-30oC] [60-70 RH] | Surface dry : 15 to 20 minutes Where as hard dry in : 3-4 hrs. |
| Shades Available | Only available in white color |
| Viscosity of Supply | 100-110 Krebs units at 30°C |
| Recommended Thinner | Potable Water |
| Covering Capacity | 22-25 sq. Metre/ltr/coat depending upon the surface and surface texture |
PRECAUTIONS
Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure
Safety Measures
Kindly refer to the MSDS for Venlac Exterior Water Thinnable Cement Primer which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
