VENLAC FURNITURE ENAMEL
Oil-Enriched Satin Finish Paint Formulated to Provide Smooth Durable Coverage
Non Yellowing Finish
Semi Gloss Finish
Superior Flow and Levelling
Highly Washable
Moisture Proof Packing
Balanced Composition

Product Description
Venlac Furniture Paint is an oil-enriched satin finish paint formulated to provide smooth durable coverage that’s resistant to spills, scuffs, stains and discoloration caused by moisture. It adheres to most surfaces, even laminate, with minimal priming and sanding needed, making it an ideal solution for upgrading furniture, whether for indoor or outdoor use. Two coats are required for best results.

Surface must be clean and sound, free from all dust, oil, grease and other contaminations. Remove all loose material with scrapper or stiff wire brush.

PAINT APPLICATION PROCESS
Prime the surface with VENLAC Furniture Red oxide Primer or VENLAC Surface Grey. Sand the surface with emery paper until a smooth level surface is obtained. It is recommended to apply two coats of furniture enamel.

Nature | Liquid |
---|---|
Finish | High Gloss Finish |
Coverage | 10 to 12 Sq. Meters / Liter |
Drying Time | 4 - 5 Hours |
Temperature | 100°C for 15 Miniutes |
Application | Brush / Spray |
Spraying Capacity | 40 to 45 Seconds & Pressure 50 Pounds |

PRECAUTIONS
Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures
Kindly refer to the MSDS for Venlac Furniture Enamel which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.

