VENLAC SAFE PAINT REMOVER
Easy to Use & Safe, High Quality and Proven Performances
Non Hazardous
Non Caustic
No Skin Burns
Product requires no ventilation
Cost Effective
Super Strong and Fast Reacting

Product Description
Venlac Safe Paint Remover is easy to use and safe. With high quality and proven performance Venlac Safe Paint Remover penetrates into successive coats of paint, vanish or enamel from a wide range of surfaces. It is super strong and fast reacting yet non caustic hence will not damage bared surfaces. It is highly viscous and can be applied on vertical surfaces. It also contains surfactant which improves penetration of the paint remover. Water based solution providing a more ecological approach to paint and varnish stripping.

Ensure that the surface to be painted is free from any damp, loose paint, dust, wax or grease and other contaminants. Remove all contaminants such as dirt, grease, oil, dust etc. with soap powder solution using a scrubbing brush. Dry for minimum of 4 – 6 hours before painting. Moisture content in the surface should be less than 10%. After diluting Venlac Wonder Coate Floor Coat with 30-40% water, apply a self-priming coat. Wait 6-7 hours, then add 2 coats of Venlac Wonder Coate Floor Coat after thinning with water to obtain brushable consistency. Do not allow traffic for 48 hours, until the paint becomes hard.

PAINT APPLICATION PROCESS
Simply apply the Venlac Safe Paint Remover with a brush, in few minutes old paint will be intenerated, blistered, brittle and separate from bottom, then remove the paint with a paint scraper or wire wool.

Nature | Liquid |
---|---|
Finish | Smooth Finish |
Coverage | 120-140 sq.ft.per litre per coat by brush application |
Drying Time | 20 minutes(at 30.C+/-1C & 65+/-%R.H) |
Recoate Time | 4 Hrs Minimum |
Thinner | Clean Tap / Potable Water |
Shades Available | White |
Shelf Life | 24 months |

PRECAUTIONS
Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures
Kindly refer to the MSDS for Venlac Safe Paint Remover which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.

