VENLAC WONDER COATE FLOOR COATE

High Adhesion and Abrasion Strength

Shades Available in Red, Yellow, Grey, Green, Blue and Ripe Olive(cow dung colour)

Semi-Gloss Finish

High Adhesion & Abrasion Strength

Washable

Resistant to Fungus & Algae

Product Description

Venlac Wonder Coate Floor Coat is a specially formulated paint manufactured from carefully selected and tested raw materials. It is fast drying and provides tough durable coating to cement, concrete and tiled floors. It gives good gloss and pleasing appearance. It blends decorative and protective qualities that every user needs. Venlac Wonder Coate Floor Coat can withstand extreme conditions of wear and tear, vehicular traffic, fungus, moisture etc., generally occurring in floor coating.

Ensure that the surface to be painted is free from any damp, loose paint, dust, wax or grease and other contaminants. Remove all contaminants such as dirt, grease, oil, dust etc. with soap powder solution using a scrubbing brush.

FRESH PAINTING SURFACE (UNPAINTED):
For freshly made concrete surface, allow it to cure for at least 4 weeks before
painting.
REPAINTING SURFACE:
Check random areas for adhesion of existing paint film. If problems are observed, total removal of old paint is required. Sand smooth and glossy surfaces to improve adhesion.

PAINT APPLICATION PROCESS

Moisture content in the surface should be less than 10%. After diluting Venlac Wonder Coate Floor Coat with 30-40% water, apply a self-priming coat. Wait 6-7 hours, then add 2 coats of Venlac Wonder Coate Floor Coat after thinning with water to obtain brushable consistency. Do not allow traffic for 48 hours, until the paint becomes hard.

NatureLiquid
Finish Smooth & Matt
Coverage 120-140 sq.ft.per litre per coat by
brush application
Drying Time20 minutes(at 30.C+/-1C & 65+/-%R.H)
Recoate Time4 Hrs Minimum
Thinner Clean Tap / Potable Water
Shades AvailableWhite
Shelf Life24 months

PRECAUTIONS

Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures

Kindly refer to the MSDS for Venlac Wonder Coate Floor Coate which gives detailed information on safety measures while handling the paint, which is available on request.

Store the container with the lid tightly closed in an upright position, in a cool, dry place.

Keep out of reach of children and away from eatables.

May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.

Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.

Do not pour leftover paint down the drain or in water courses.

In the event of spills, contain spillage using sand or earth.

Related Products

Amaza leak seal

cement modifier

Venlux Distember

Do You Want To Spice Up Your Space?

drop us a line for amazing living spaces

×
×

Cart

× How can I help you?