VENLAC WOOD PRIMER
Protect From Exudation of Resinous Matter Oozing Out From The Wood
Available in White and Pink Shades
Anti-Fungal and Anti-Algal Properties
Primes and Seals a Variety of Woods
Dries to Enhance Performance
Provides Tough Film
Free From Heavy Metals

Product Description
Venlac Wood Primer is designed specifically for use on interior and exterior new and unpainted hard and soft wood before applying a paint topcoat. Venlac Wood Primer is manufactured with a special type of synthetic alkyd binder and micro fine pigments along with extenders and different additives. It is an air drying primer for wood and its by-products, providing hard and tough film. Venlac Wood Primer is specially formulated to protect wood. It has excellent sealing and filling properties which protects wood from swelling due to absorption of moisture. Venlac Wood Primer penetrates wood fibre and gives excellent adhesion to substrates and also serves as a sound base for application of undercoats and finishing coats. It also protects the finish coat from exudation of resinous matter oozing out from the wood.

Surface to be primed must be clean, dry and free from contaminants. Remove mould, moss or algae from surface and allow to dry thoroughly. Fill and repair all cracks and joints. Remove any flaking or blistering paint by chemical, mechanical means.

PAINT APPLICATION PROCESS
Stir well before use and apply with a brush and work well into the wood grain. Apply a full coat, allow to dry overnight. Sand back using #150-180 grit paper. If necessary re-coat areas that show substrate after sanding. The coverage is dependent on texture and porosity of the surface.

Nature | Liquid |
---|---|
Finish | Smooth & Matt |
Coverage | 12 to 14 Sq Meters Per Liter by Brush on a Properly Prepared Surface |
Drying Time | 10 - 15 Minutes |
Shades Available | White ana Pink |
Thinner | Use any General Purpose Thinner as Required |
Application | Brush / Spray |
Flim Thickness | 25 - 30 Microns by Brushing |

PRECAUTIONS
Don’t over thin
Stir well and strain the mixture before use
Avoid the use of Plaster of Paris for dense and cracks
Avoid premature paint failure

Safety Measures
Kindly refer to the MSDS for Venlac Wood Primer which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.

